To Next PageTo Next PageWhy is the volume level low while playing a record on my Yamaha R-N803 D Receiver?
If the volume level is low while playing a record on your Yamaha Receiver, it could be because the record is being played on a turntable with an MC cartridge. In this case, the turntable should be connected to the unit through an MC head amplifier.
General| Channels | 2 |
|---|---|
| Power Output | 100 W + 100 W (8 ohms, 20 Hz-20 kHz, 0.07% THD) |
| Signal-to-Noise Ratio | 100 dB (CD) |
| Connectivity | Wi-Fi, Ethernet, Bluetooth |
| Amplifier Type | Integrated |
| Bluetooth Version | 4.2 |
| Streaming Services | Spotify, Tidal, Deezer, Napster |
| Radio | FM |
| Inputs | 2 x Optical, 2 x Coaxial, Phono |
| Outputs | 1 x Subwoofer |
| USB | 1 x USB Type A (front) |
| Dimensions | 435 x 151 x 392 mm |
| Weight | 11.0 kg |
| DAC | 192kHz/24-bit |
| Speaker Impedance | 8 ohms |
| Total Harmonic Distortion | 0.015% (CD to Sp Out, 20 Hz-20 kHz) |
Explains the meaning of safety warning symbols used in the manual.
Details FCC regulations, compliance statements, and authorized party information.
Covers serial number recording and manual retention.
Guidelines for safe usage of the power cord and supply.
Covers warnings for disassembly, water, fire, wireless, and abnormalities.
Instructions for unit maintenance, cleaning, and battery handling.
Recommendations for safe and proper unit installation.
Advice on preventing hearing damage from loud volumes.
Precautions for handling the unit and its batteries.
Notices regarding product failure, damage, and environmental protection.
Information about manual content, illustrations, and warning icon meanings.
Overview of the network receiver's functionalities and capabilities.
Lists the various audio sources compatible with the unit.
Details the unit's power button, power indicator status, and remote control sensor.
Explains controls for radio tuning, station presets, and volume adjustment.
Describes the Pure Direct mode for high-fidelity sound.
Details headphone jack, speaker output selection, and USB jack.
Explains input source selection and bass/treble/balance adjustments.
Covers volume, loudness controls, and menu navigation buttons.
Details general status display and Bluetooth connection indicator.
Explains indicators for signal strength, sleep timer, stereo, and tuning.
Describes indicators for volume, cursor keys, speaker output, and mute status.
Details analog and digital audio input/output connections.
Explains connections for antennas, network cable, and power cord.
Details trigger out, subwoofer out, and speaker terminals.
Explains input source selection keys and radio band/tuning controls.
Details preset recall/memory keys and menu navigation buttons.
Covers playback control keys and volume adjustment buttons.
Details function keys for sleep timer, options, mute, and playback.
Instructions for installing remote batteries and optimal operating range.
Basic rules for connecting audio components, including polarity and cable types.
Visual guide for connecting turntables, players, and speakers.
Specifies required speaker impedance to prevent unit overheating.
Instructions for connecting speaker cables and banana plugs.
Details the bi-wire connection method for compatible speakers.
Instructions for connecting FM and AM antennas.
Instructions for connecting the DAB/FM antenna.
Steps for assembling the supplied AM antenna.
Guide for connecting the unit to a network via cable.
Instructions for connecting the power cord and setting voltage.
Steps for preparing and positioning the wireless antenna.
Introduces various methods for connecting to a wireless network.
Explains automatic network setup using an iOS device.
Instructions for connecting the unit via a wired network.
Guide for direct wireless connection to a mobile device.
Steps to share Wi-Fi settings from an iOS device.
Procedure to check the unit's network connection status.
Overview and setup for the MusicCast multi-room audio system.
Steps to select and play audio from different sources.
How to switch and view playback details on the front display.
Explains the Pure Direct mode for bypassing tone controls.
Guides for adjusting bass, treble, and speaker balance.
Instructions for adjusting the loudness control for low-volume listening.
How to set the unit to automatically enter standby mode.
Steps for tuning into FM and AM radio stations.
Guide for saving and recalling favorite radio stations.
Procedure to recall previously saved radio presets.
Steps to remove registered radio presets.
How to view Radio Data System information.
Guide to tuning into and selecting DAB radio stations.
Steps to save DAB stations as presets.
How to recall and clear DAB radio presets.
Details on displaying various types of DAB information.
Procedure to check the reception strength of DAB channels.
Instructions for pairing the unit with Bluetooth devices.
Steps to play audio content from connected Bluetooth devices.
How to establish a Bluetooth connection with the unit.
Procedures for disconnecting an active Bluetooth connection.
Guide to setting up media sharing on PCs/NAS for streaming.
Using remote keys to control playback of PC/NAS music files.
Configuring repeat and shuffle modes for music playback.
Instructions for setting up AirPlay and playing music from Apple devices.
Using remote keys for playback control and adjusting volume via AirPlay.
Guide for connecting USB storage devices to the unit.
Steps to select and play music files from USB devices.
Configuring repeat and shuffle playback for USB content.
Setting up automatic playback for USB storage devices.
How to save current songs or stations as presets.
Procedure to recall and clear saved presets.
Explains the YPAO function for automatic speaker setup.
Setting up speakers and controls before YPAO measurement.
Guide for placing and connecting the YPAO measurement microphone.
Steps to start, perform, and save YPAO measurement results.
How to enter and move through the Option menu.
Lists available settings like Volume Trim and Auto Playback.
Guide to accessing and navigating the unit's setup menu.
Details settings for network connection, information, and name.
Configuration options for Bluetooth and YPAO functions.
Settings for volume limits, auto standby, and eco mode.
Setting the unit's IP address, subnet mask, and gateway.
Configuring network standby and the unit's network name.
Enabling/disabling Bluetooth and its standby function.
Adjusting YPAO measurement and volume related settings.
Setting the auto-standby function to save power.
Enabling the eco mode for reduced power consumption.
How to check the currently installed firmware version.
Configuring speaker impedance and remote control ID.
Setting tuner frequency steps and restoring default settings.
Instructions for updating the unit's firmware.
Resolving issues related to power not turning on or no sound.
Diagnosing and fixing sound cut-offs, hums, and side-speaker issues.
Troubleshooting problems with the remote control not functioning.
Resolving issues with FM/AM signal strength and station selection.
Troubleshooting DAB reception, signal strength, and information display.
Resolving issues with connecting to Bluetooth devices.
Fixing problems with sound cutting off or no audio from Bluetooth.
Resolving problems with USB device detection and network function.
Troubleshooting internet radio and PC/server connection issues.
Resolving problems with AirPlay detection and wireless LAN connectivity.
Lists compatible Bluetooth and AirPlay devices.
Details supported audio file formats for USB, PC, and NAS.
Details network connectivity and Bluetooth performance specifications.
Provides specifications for audio output, input sensitivity, and tuner performance.
