Why can I hear a humming sound from my Yamaha R-N803D Receiver?
If you're hearing a humming sound from your Yamaha Receiver, check the audio cable connections to ensure they are firmly connected. If the problem persists, the cables may be defective. Also, if using a turntable, make sure it is connected to the GND terminal on the unit.
Why Yamaha Receiver cannot tune into any DAB stations?
If you cannot tune into any DAB stations with your Yamaha Receiver, ensure that the initial scan has been performed. If the signal is weak, try changing the antenna height, direction, or placement. Also, verify that there is DAB coverage in your area.
Why is the volume level low when playing a record on my Yamaha R-N803D?
If the volume level is low while playing a record on your Yamaha Receiver, and you are using a turntable with an MC cartridge, connect the turntable to the unit through the MC head amplifier.
Why is the sound degraded when listening with headphones on my Yamaha R-N803D?
If the sound quality is degraded when listening with headphones connected to the CD player or tape deck via the Yamaha Receiver, ensure that the power of the Yamaha Receiver is turned on.
How to fix DAB radio reception on Yamaha Receiver if it's poor and noisy?
If the DAB radio reception is poor and you're hearing noise like hiss, crackle, or jitter on your Yamaha Receiver, the DAB radio signal may be weak. Try changing the antenna's height, direction, or place of installation.
General| Signal-to-Noise Ratio | 100 dB (CD) |
|---|---|
| Weight | 11.0 kg |
| Channels | 2 |
| USB Ports | 1 (Front) |
| Optical Input | 2 |
| Coaxial Input | 2 |
| HDMI | No |
| Frequency Response | 10 Hz-100 kHz (+0 dB, -3 dB) |
| Total Harmonic Distortion | 0.019% (50 W/8 ohms) |
| Dimensions | 435 x 151 x 392 mm |
| Connectivity | Wi-Fi, Bluetooth |
| Inputs | 2 x Optical, 2 x Coaxial |
| Outputs | 2 x Speaker |
| Rated Output Power | 100 W + 100 W (8 ohms, 20 Hz-20 kHz, 0.019% THD) |
| Input Sensitivity | 200 mV |
| Speaker Impedance | 4 ohms |
| Tuner Type | DAB+, FM |
| Bluetooth Version | 4.2 |
| Wi-Fi Standard | 802.11 a/b/g/n |
| Phono Input | Yes |
| Power Output | 100 W + 100 W (8 ohms, 20 Hz-20 kHz, 0.019% THD) |
| Type | Network Stereo Receiver |
Highlights risks of serious injury, death, or minor injury from improper use.
Guidelines for safe handling of the power cord and preventing electrical hazards.
Precautions against water exposure, fire hazards, and incompatible environments.
Guide to connecting various audio components, speakers, and antennas.
Overview of methods for connecting the unit to a network.
Details different methods for establishing a network connection.
Automatic room acoustic calibration for optimal sound.
Accessing and modifying unit settings via the Setup menu.
Accessing system-level configurations via the front panel.
Procedure for downloading and installing firmware updates over the network.
Common problems and solutions for general unit operation.
Resolving issues with FM, AM, and DAB radio reception.
Resolving issues with Bluetooth, USB, and network connections.
Explains messages related to access permissions and device errors.
To Next Page
