Yamaha RX-E410 User Manual

ii
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this unit (RX-E410 and CDX-E410) in a well ventilated,
cool, dry, clean place with at least 10 cm on the top (except for
CDX-E410), 10 cm on the left and right, and 10 cm at the back of
this unit — away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold.
3 Locate this unit away from other electrical appliances, motors, or
transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from cold
to hot, and do not locate this unit in an environment with high
humidity (i.e. a room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may fall onto this
unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire, damage
to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to this
unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain, etc.
in order not to obstruct heat radiation. If the temperature inside
this unit rises, it may cause fire, damage to this unit, and/or
personal injury.
7 Do not plug in this unit to a wall outlet until all connections are
complete.
8 Do not operate this unit upside-down. It may overheat, possibly
causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet, grasp
the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might damage
the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this unit
with a higher voltage than specified is dangerous and may cause
fire, damage to this unit, and/or personal injury. YAMAHA will
not be held responsible for any damage resulting from use of this
unit with a voltage other than specified.
13 Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed.
The cabinet should never be opened for any reasons.
14 When not planning to use this unit for long periods of time (i.e.
vacation), disconnect the AC power plug from the wall outlet.
15 Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.
16 Before moving this unit, press STANDBY/ON to set this unit in
standby mode, and disconnect the AC power plug from the wall
outlet.
17 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the outlet,
then leave the unit alone.
18 When using the unit for a long time, the unit may become warm.
Turn the power off, then leave the unit alone for cooling.
19 Install this unit near the wall outlet and where the AC power plug
can be reached easily.
DANGER
When this unit is plugged to the wall outlet, do not place your
eyes close to the opening of the disc tray and other openings to
look into inside.
■ For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the instructions
described below.
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
■ Special Instructions for U.K. Model
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit itself
is turned off. This state is called the standby mode. In this
state, this unit is designed to consume a very small quantity of
power.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
The laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this appa-
ratus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.

Yamaha RX-E410 Specifications

Summary

Product Features and Accessories

Receiver Features

Details the specifications and capabilities of the RX-E410 receiver unit.

CD Player Features

Details the specifications and capabilities of the CDX-E410 CD player unit.

Supplied Accessories

Lists all the items included with the audio system for setup and use.

Controls and User Interface

Receiver Front Panel Controls

Identifies and explains the buttons and knobs on the front of the receiver.

Receiver Rear Panel Connections

Details the various input and output terminals on the rear of the receiver.

Receiver Front Panel Display

Explains the indicators and multi-information display on the receiver's front panel.

CD Player Front Panel Controls

Identifies and explains the buttons and display on the CD player's front panel.

CD Player Rear Panel Connections

Details the output and system connection terminals on the CD player's rear panel.

Remote Control Overview and Operations

Explains the functions of the remote control for common system operations.

Remote Control CD Mode Operations

Details how to use the remote control for CD playback functions.

Remote Control Tuner Mode Operations

Details how to use the remote control for tuner functions.

Remote Control Battery and Usage

Provides instructions for installing batteries and proper remote control usage.

System Preparation and Connections

Connecting the System Components

Guides on connecting the receiver, CD player, and speakers together.

Connecting Speaker Cables

Instructions for properly connecting speaker cables to the receiver.

Connecting Antennas

Details how to connect the AM loop and FM antennas for radio reception.

Connecting External Components

Explains how to connect other audio devices like MD players or tape decks.

Connecting a YAMAHA iPod Dock

Instructions for connecting an iPod universal dock to the receiver.

Connecting Power Cables

Guides on connecting the power cables for the receiver and CD player.

Basic Operations and Settings

Adjusting the Receiver Clock

Step-by-step guide to set the internal clock of the receiver.

Basic Receiver Operations

Instructions for selecting input sources and adjusting sound settings.

Changing Front Panel Display Settings

How to switch display modes and dim the receiver's front panel display.

Basic Disc Playback Operations

Explains how to play, pause, stop, skip, and fast forward discs.

Repeat and Random Playback Modes

How to enable and disable repeat and random playback for discs.

Customizing Disc Playback Order

Instructions for programming a custom playback sequence for tracks.

Tuner Operations

FM/AM Tuning Methods

Explains automatic and manual tuning for radio stations.

Automatic and Manual Preset Tuning

Guides on storing favorite radio stations automatically or manually.

Selecting Preset Stations

Instructions for tuning into stored radio stations using presets.

Radio Data System Tuning

Details on tuning and searching for stations using Radio Data System information.

Displaying RDS Information

How to view PS, PTY, RT, and CT data from RDS broadcasts.

CT Clock Time Settings

Using RDS CT information to automatically set the receiver's clock.

Advanced Timer and iPod Operations

Setting the Clock Timer

How to set the receiver to turn on or off automatically at a specific time.

Setting the Sleep Timer

How to set the receiver to turn off automatically after a specified duration.

Setting Auto-Standby Mode

How to enable or disable the system's auto-standby feature.

Controlling iPod via Remote

Operating a connected iPod using the system's remote control.

Using iPod Menu Browse Mode

Navigating iPod menus via the receiver's front panel display.

Troubleshooting Guide

Receiver Troubleshooting

Solutions for common problems encountered with the receiver unit.

Tuner Troubleshooting

Solutions for issues related to FM and AM radio reception.

iPod Troubleshooting

Solutions for common status messages and problems with iPod connection.

CD Player Troubleshooting

Solutions for issues related to CD playback and disc reading.

Remote Control Issues

Troubleshooting steps for when the remote control is not functioning properly.

Disc Information, Glossary, and Specifications

Disc Compatibility and Handling

Information on supported disc types and proper disc handling practices.

Audio Information Glossary

Definitions of technical audio terms and compression methods used.

Product Specifications

Technical details and measurements for the receiver and CD player.