Yamaha RX-S600 Quick Setup Guide

Check that the following accessories are supplied with the product.
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (depending on the number of speakers)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1)
(not required if your TV supports ARC [Audio Return Channel])
1 Preparation
Accessories
 Remote control  Batteries (AAA, R03, UM-4) (x2)  AM antenna (RX-S600)
Insert the batteries the right way
round.
 FM antenna (RX-S600)  DAB/FM antenna
(RX-S600D)
 YPAO microphone
 CD-ROM (Owner’s Manual)  Safety Brochure  Easy Setup Guide
*The supplied FM antenna varies
depending on the region of
purchase.
• The illustrations of the main unit and remote control used in this guide are of the RX-S600 (U.S.A.
model), unless otherwise specified.
Cables required for connections
Easy Setup Guide
English
AV Receiver
This document explains how to set up a 5.1-channel system and play back
surround sound from a BD/DVD on the unit.
To reduce the impact on natural resources, the Owner’s Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner’s Manual on the supplied CD-ROM.
PDF versions of this guide and “Owner’s Manual” can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ’s, downloads such as
“Owner’s Manual” and product updates.
http://usa.yamaha.com/support/
UAB
RX-S600_S600D_esg_En.fm Page 1 Monday, May 20, 2013 2:18 PM

Yamaha RX-S600 Specifications

General

Receiver type	-
Pre-out channels	1 SW
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Dynamic power per channel (4 Ohm)	140 W
Dynamic power per channel (8 Ohm)	90 W
Power output per channel (1KHz@6 Ohm)	95 W
Power output per channel (20-20KHz@8 Ohm)	60 W
HDMI in	5
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Headphone connectivity	6.3 mm
Digital audio optical out	0
AM band range	522 - 1.620 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LED
Product color	Titanium
Audio decoders	Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio
Apple docking compatibility	Not supported
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W

Weight and Dimensions

Depth	320 mm
Width	435 mm
Height	111 mm
Weight	7800 g