How to fix noisy FM stereo reception on Yamaha Receiver?
If you are experiencing noisy FM stereo reception on your Yamaha Receiver: * Check the antenna connections and consider using a high-quality directional FM antenna. * Try using the manual tuning method.
Why can't I play Dolby Digital or DTS sources on my Yamaha RX-V450?
If Dolby Digital or DTS sources cannot be played on your Yamaha Receiver: * Verify the connected component is set to output Dolby Digital or DTS digital signals. * Ensure the input mode is set to AUTO or DTS, not ANALOG.
Why is there no sound from the surround back speaker on my Yamaha Receiver?
If you're not getting sound from the surround back speaker on your Yamaha Receiver, check that “SURR LR” in SET MENU is not set to NONE. If the surround left and right speakers are set to NONE, the surround back speaker setting is automatically set to NONE. Select the appropriate setting for the surround speakers. Also, ensure that “SURR B” in SET MENU is set to LRG or SML.
Why no sound from effect speakers on Yamaha Receiver?
If you're not getting sound from the effect speakers on your Yamaha Receiver, it might be because the sound field programs are turned off. Press STRAIGHT (EFFECT) to turn them on. Alternatively, you might be using a source or program combination that doesn't output sound from all channels, so try another sound field program.
Why is there no sound from the center speaker on my Yamaha Receiver?
If you're not hearing sound from the center speaker on your Yamaha Receiver, first, make sure the output level of the center speaker is not set to minimum. Second, check that “CENTER” in SET MENU is not set to NONE and select the appropriate setting. Finally, if one of the Hi-Fi DSP programs (except for 6ch Stereo) is selected, try another sound field program.
Why no sound from surround speakers on Yamaha RX-V450?
If you're not getting any sound from the surround speakers on your Yamaha Receiver, first, raise the output level of the surround speakers. Second, check that “SURR LR” in SET MENU is not set to NONE; select the appropriate setting for the surround left and right speakers. Finally, if you are playing a monaural source with STRAIGHT, press STRAIGHT (EFFECT) to turn on the sound fields.
Why is there no sound coming from my Yamaha RX-V450?
If there is no sound from your Yamaha Receiver, check the following: * Ensure all input and output cables are properly connected and not defective. * Verify the input mode is set to AUTO or DTS, not ANALOG. * Select the correct input source using the INPUT, MULTI CH INPUT, or input selector buttons. * Make sure speaker connections are secure. * Choose the appropriate front speakers with SPEAKERS A and/or B. * Increase the volume and ensure the receiver is not muted by pressing MUTE or any operation button.
Why is there no sound from the subwoofer of my Yamaha RX-V450 Receiver?
If there's no sound from the subwoofer on your Yamaha Receiver, consider the following: * If playing a Dolby Digital or DTS signal, ensure “BASS OUT” in SET MENU is set to SWFR or BOTH, not FRONT. * If playing a 2-channel source, set “BASS OUT” in SET MENU to BOTH instead of SWFR or FRONT. * The source may not contain low bass signals.
Why can I only hear sound from one speaker on my Yamaha RX-V450 Receiver?
If you can only hear sound from one side of your Yamaha Receiver, check these possible causes: * Incorrect cable connections. Connect the cables properly, and if the issue persists, the cables may be defective. * Incorrect balance settings. Adjust the SP LEVEL settings in the SET MENU.
What to do if Yamaha Receiver center speaker has no sound?
If there is no sound from the center speaker connected to your Yamaha Receiver: * Raise the level of the center speaker. * Select the appropriate setting for the center speaker in “CENTER” in SET MENU. * Try another sound field program.
General| Channels | 6.1 |
|---|---|
| Signal-to-Noise Ratio | 100 dB |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| Audio D/A Converter | 24-bit/192 kHz |
| Surround System Class | 6.1 channel |
| Digital Sound Processor (DSP) | Yes |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| Frequency Response | 10Hz-100kHz |
| Total Harmonic Distortion | 0.06 % |
| Inputs | 4 x Audio |
| Outputs | 1 x Audio (RCA), 1 x Video (Composite) |
| Built-in Decoders | Dolby Digital, DTS |
| Surround Sound Effects | Dolby Pro Logic II |
| Tuning Range | FM: 87.5 - 108 MHz |
| Connector Type | RCA |
| Amplifier Output Details | 85 W (Front), 85 W (Center), 85 W (Surround), 85 W (Surround Back) |
| DSP Presets | 7ch stereo, Concert hall, Disco, Game, Jazz club, Movie, Stadium |
To Next Page
