Yamaha RX-V871 Easy Setup Guide

Check that the following accessories are supplied with this product.
You need to separately prepare the following cables to build the system based on this
document.
■ Speaker cables (depending on the number of speakers)
■ HDMI cable (x 2)
■ Audio pin cable (x 1)
■ Digital optical cable (x 1) (unnecessary if your TV supports ARC)
1 Preparations
Accessories
Cables necessary for connections
■ CD-ROM
(Owner’s Manual)
■ Safety Brochure ■ Easy Setup Guide
(this document)
■ Remote control ■ Batteries (AAA, R03, UM-4) (x 2)
Insert into the remote control in the correct polarity (+/-).
■ YPAO microphone ■ VIDEO AUX input cover
■ AM antenna ■ FM antenna
*The figure of the supplied FM
antenna differs depending on
regions.
Easy Setup Guide
English for U.S.A.
This document explains how to set up a 5.1- or 7.1-channel
system and play back surround sound of a BD/DVD on this unit.
For more information, refer to “Owner’s Manual” on the supplied
CD-ROM.
A PDF format of this guide and “Owner’s Manual” can be downloaded
from the following website.
http://download.yamaha.com/
AV Receiver

Yamaha RX-V871 Specifications

General

Audio Channels	7.2
HDMI Inputs	6
HDMI Outputs	2
Dolby Atmos	No
DTS:X	No
Type	AV Receiver
3D Support	Yes
Audio Return Channel (ARC)	Yes
Zone Output	Zone 2
Frequency Response	10 Hz - 100 kHz
Total Harmonic Distortion	0.09%
Input Sensitivity/Impedance	200 mV / 47 kΩ
Signal-to-Noise Ratio	100 dB
Audio Decoders	Dolby TrueHD, DTS-HD Master Audio
DSP Programs	17
Surround Sound	Yes
Radio Section	FM/AM
Preset Stations	40
Network Connectivity	Ethernet
Streaming Services	DLNA, AirPlay
Network Features	AirPlay, DLNA
HDMI Support	4K, 3D, ARC