64
●
UTILITY Mode
●
If you attempt to delete an empty or locked song, the LCD briefly displays an appropriate mes-
sage, then returns to the original prompt. You must then change the song selection or else press
[EXIT].
Lock [Lock]
You use this utility to lock or unlock selected banks or songs. The lock feature
allows you to protect samples and songs from accidental editing or deletion. Spe-
cifically, the SU10 does not allow you to edit or delete any sample within a locked
bank, and will not allow you to overwrite a locked song.
When you first enter this utility, the LCD displays the lock setting for Bank A. If the
lock is Off, for example, the display will look like this:
Bank A
Off
Proceed as follows.
1. To move to the setting for a different bank or song, press [>] or [<]. The se-
quence is:
Bank A [<][>] Bank B [<][>] Bank C [<][>] Bank D [<][>]
Song 1 [<][>] Song 2 [<][>] Song 3 [<][>] Song 4
2. To change the lock setting to On, press [+1]. To change the setting to Off, press
[–1].
3. To return to the UTILITY menu, press [EXIT].
Initialize [Init]
You can use this utility to (
a
) delete all song and sample data, or (
b
) delete all song
and sample data while at the same time resetting all system parameters to their
defaults. The SU10 will refuse to execute this operation if any banks or songs are
locked.
The utility consists of two functions, as follows.
Init Data? [<][>] Init All?
To Next Page
Loading...
