Instrument and control functions
4-13
4
To close the seat
1. Fold the seat down, and then push
it down to lock it in place.
2. Remove the key from the main
switch if the vehicle will be left un-
attended.
Make sure that the seat is properly se-
cured before riding.
EAUV0850
Helmet holders
The helmet holders are located under
the seat.
To secure a helmet to a helmet hold-
er
1. Open the seat. (See page 4-12.)
2. Attach the D-ring of the helmet
strap to a helmet holder, and then
securely close the seat.
WARNING! Never ride with a
helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
[EWA10162]
To release a helmet from a helmet
holder
Open the seat, remove the helmet from
the helmet holder, and then close the
seat.
1. Helmet holder
2. D-ring
1
2
UBAWE0E0.book Page 13 Wednesday, March 3, 2021 2:21 PM
To Next Page
Loading...
