Yamaha T155 2021 - License Plate Light Bulb Replacement; Front Wheel Removal and Installation

Periodic maintenance and adjustment
7-34
7
EAUM3510
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screw.
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screw.
EAU24361
Front wheel
EAU60841
To remove the front wheel
WARNING
EWA10822
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Remove the axle nut.
3. Pull the wheel axle out, and then
remove the wheel. NOTICE: Do
not apply the brake after the
1. Screw
1
1. License plate light bulb
1
1. Axle nut
1
UBAWE0E0.book Page 34 Wednesday, March 3, 2021 2:21 PM