Periodic maintenance and adjustment
7-32
7
6. Install the battery cover by install-
ing the screws.
7. Close the seat.
EAUN2261
Vehicle lights
This model is equipped with LED lights
for headlights, auxiliary lights and
brake/tail light. If a light does not come
on, check the fuse and then have a
Yamaha dealer check the vehicle.
ECA16581
Do not affix any type of tinted film or
stickers to the headlight lens.
EAUV0560
Replacing a front turn signal
light bulb
ECA10671
It is advisable to have a Yamaha
dealer perform this job.
1. Place the vehicle on the center-
stand.
2. Remove panel A and B. (See page
7-8.)
3. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
4. Remove the burnt out bulb by
pulling it out.
5. Insert a new bulb into the socket.
1. Headlight (high beam)
2. Headlight (low beam)
3. Auxiliary light
1. Turn signal light bulb
UBAWE0E0.book Page 32 Wednesday, March 3, 2021 2:21 PM