Why Yamaha TSX-132 Stereo System indicates “iPod Unknown”?
If your Yamaha Stereo System displays “iPod Unknown” when you connect your iPod, the iPod you're using might not be supported by the unit. Use a supported iPod.
What does “USB OverCurrent” mean on my Yamaha TSX-132 Stereo System?
If your Yamaha Stereo System shows “USB OverCurrent” and the display goes blank when you connect a USB device, an incompatible USB device might be connected, or the USB device isn't firmly connected. Turn the system off, disconnect the USB device, turn the system back on, and reconnect the USB device. If it still doesn't work, the USB device might not be playable on the unit.
How to fix Yamaha TSX-132 Stereo System when the speakers make no sound?
If your Yamaha Stereo System speakers aren't producing any sound, make sure the volume isn't set too low or muted. Also, check that you've selected the correct source and that headphones aren't plugged in. If you're using an external device, ensure its volume is turned up.
Why MP3/WMA file on the USB device does not play on Yamaha TSX-132?
If your Yamaha Stereo System's MP3/WMA file on the USB device isn't playing, the USB device might not be recognized or might not contain playable files. Turn the system off, disconnect the USB device, turn the system back on, and reconnect the USB device. If it still doesn't work, the USB device might not be playable on the unit.
Why CD cannot be inserted into Yamaha TSX-132 Stereo System?
If you can't insert a CD into your Yamaha Stereo System, another disc may already be inserted, or you might be trying to insert a disc that the unit doesn't support. Eject the existing disc or use a supported disc.
Why is the front panel display dim on my Yamaha TSX-132?
If the front panel display of your Yamaha Stereo System becomes dim, the brightness setting might be set to AUTO. Change the brightness setting to something other than AUTO or make sure that the illumination sensor is not covered.
How to fix too much noise during stereo broadcast on Yamaha TSX-132?
If your Yamaha Stereo System is experiencing too much noise during stereo broadcast, the radio station might be far from your location, or the radio wave reception might be weak. Try manual tuning to improve the signal quality.
Why does my Yamaha TSX-132 say “No Disc” or “CD Unknown?”
If your Yamaha Stereo System displays “No Disc” or “CD Unknown” when you insert a disc, ensure that the disc is compatible with the unit, clean, and contains playable files. Also, make sure you've inserted the disc with the label facing upward.
How to reduce noise on Yamaha TSX-132 Stereo System?
If you're experiencing too much noise with your Yamaha Stereo System, it could be due to an improperly connected antenna or its proximity to the unit or other electronic devices. Ensure the antenna is correctly connected and position it as far away as possible from the unit and other electronic devices.
What to do if Yamaha TSX-132 Stereo System does not operate properly?
If your Yamaha Stereo System isn't operating properly, it may have experienced a strong electrical shock or a drop in power supply. Turn the system off, disconnect the power cable, wait about 30 seconds, reconnect the power cable, and turn it back on.
General| Brand | Yamaha |
|---|---|
| Model | TSX-132 |
| Category | Stereo System |
| Language | English |
How to connect and play music from an iPod device.
Instructions for playing audio CDs and data CDs.
Instructions for playing music files from a USB storage device.
How to find and listen to FM radio stations.
How to connect and play audio from external devices using the AUX input.
Explains the three alarm types and available audio sources.
Step-by-step guide to configuring alarm time, type, and source.
How to switch the alarm on/off and manage it during playback.
Solutions for common problems with the unit's general operation.
Problems and solutions related to iPod connectivity and playback.
To Next Page
