8-11
8
To install
1. Insert the projections on the hood into the
slots in the front grill, and then place the
hood in the original position.
2. Turn the hood locks 1/4 turn counter-
clockwise, and then push the tab on each
hood lock down so that it is pointing rear-
ward. Make sure that the hood is securely
installed.
ECB02180
Do not drive the vehicle with the hood
open, unlatched, or removed.
EBU33602
Panels
Left panel
To remove the left panel
1. Remove the bolts.
2. Open the driver door, and then remove
the quick fastener screws.
1. Bolt
2. Left panel
UB3D7AE0.book Page 11 Tuesday, November 7, 2017 9:38 AM
To Next Page
Loading...
Need help?
General
