5-6
5
ECB00301
In order to prevent clutch slippage (since
the engine oil also lubricates the clutch),
do not mix any chemical additives. Do
not use oils with a diesel specification of
“CD” or oils of a higher quality than
specified. In addition, do not use oils la-
beled “ENERGY CONSERVING II” or
higher.
Make sure that no foreign material en-
ters the crankcase.
EBU31761
Coolant
Check the coolant level in the reservoir and
replenish if necessary. (See page 8-25.)
EBU36020
Final gear
Make sure there is no oil leaking from the final
gear case.
EBU36030
Differential gear
Make sure there is no oil leaking from the dif-
ferential gear case.
EBU31791
Accelerator pedal
Before starting the engine, confirm that the
accelerator pedal operates correctly. It
should depress smoothly and spring back to
the idle position when released. Also check
the accelerator pedal for excessive free play.
If the accelerator pedal is not in correct work-
ing order, have the vehicle inspected before
starting off.
Recommended engine oil type and quantity:
See page 10-1.
UB3D7AE0.book Page 6 Tuesday, November 7, 2017 9:38 AM
To Next Page
Loading...
Need help?
General
