4-15
4
EBU33461
Seats
To remove a seat cushion, lift the front of the
cushion, and then pull the cushion off.
To install a seat cushion, insert the projec-
tions on the rear of the seat cushion under the
seat frame, and then insert the projection on
the front of the cushion into the grommet
while pushing the cushion downward. Make
sure the seats are properly secured before
starting off. WARNING! A loose seat could
cause the operator to lose control, or cau-
se the operator or passenger to fall.
[EWB03510]
1. Door
2. Latch
1. Seat cushion
UB3D7AE0.book Page 15 Tuesday, November 7, 2017 9:38 AM
To Next Page
Loading...
Need help?
General
