8-17
8
9. Install the rubber cover.
10. Install the passenger seat cushion.
To change the engine oil (and filter)
1. Park the vehicle on a level surface.
2. Start the engine, warm it up for several
minutes, and then turn it off.
3. Remove the passenger seat cushion.
(See page 4-15.)
4. Remove the rubber cover.
5. Remove the engine oil dipstick.
6. Place an oil pan under the engine to col-
lect the used oil.
7. Remove the engine oil drain bolt. Discard
the used gasket.
Perform steps 8–10 when replacing the oil fil-
ter cartridge.
8. Remove the oil filter cartridge.
1. Engine oil drain bolt
2. Gasket
UB3D7AE0.book Page 17 Tuesday, November 7, 2017 9:38 AM
To Next Page
Loading...
Need help?
General
