8-55
8
3. Disconnect the headlight coupler.
4. Unhook the headlight bulb holder.
5. Wait for the headlight bulb to cool before
touching or removing it. Remove the
burnt-out bulb by pulling it out.
6. Place a new headlight bulb into position,
and then secure it with the bulb holder.
NOTICE: Do not touch the glass part of
the bulb. Oil from your fingers or other
contamination will adversely affect the
transparency of the glass, luminosity
of the bulb, and bulb life. Thoroughly
1. Headlight bulb cover
1. Headlight coupler
1. Headlight bulb holder
UB3D7AE0.book Page 55 Tuesday, November 7, 2017 9:38 AM
To Next Page
Loading...
Need help?
General
