8-14
1FSJPEJDNBJOUFOBODFBOEBEKVTUNFOU
4. Remove the coolant reservoir cov-
er.
5. Remove the coolant reservoir cap,
add coolant to the maximum level
mark, and then install the reservoir
cap. 8"3/*/( 3FNPWF POMZ
UIFDPPMBOUSFTFSWPJSDBQ/FWFS
BUUFNQUUPSFNPWFUIFSBEJBUPS
DBQ XIFO UIF FOHJOF JT IPU
[EWA15162] NOTICE:*GDPPMBOUJTOPU
BWBJMBCMFVTF EJTUJMMFEXBUFSPS
TPGU UBQ XBUFS JOTUFBE %P OPU
VTF IBSE XBUFS PS TBMU XBUFS
TJODFJUJTIBSNGVMUPUIFFOHJOF
*GXBUFSIBT CFFOVTFEJOTUFBE
PGDPPMBOUSFQMBDFJUXJUIDPPM
BOUBT TPPOBT QPTTJCMFPUIFS
XJTFUIFDPPMJOHTZTUFNXJMMOPU
1. Floorboard mat
1. Coolant reservoir cover
1
1
CF QSPUFDUFE BHBJOTU GSPTU BOE
DPSSPTJPO *G XBUFS IBT CFFO
BEEFE UP UIF DPPMBOU IBWF B
:BNBIB EFBMFS DIFDL UIF BOUJ
GSFF[FDPOUFOUPGUIFDPPMBOUBT
TPPOBTQPTTJCMFPUIFSXJTFUIF
FGGFDUJWFOFTTPGUIFDPPMBOUXJMM
CFSFEVDFE
[ECA10473]
6. Install the coolant reservoir cover.
7. Place the left oorboard mat in the
original position and push it down-
ward to secure it.
EAU33032
$IBOHJOHUIFDPPMBOU
The coolant must be changed at the in-
tervals specied in the periodic mainte-
nance and lubrication chart. Have
a
Yamaha dealer change the coolant.
8"3/*/(/FWFSBUUFNQUUPSFNPWF
1. Coolant reservoir cap
$PPMBOUSFTFSWPJSDBQBDJUZVQUP
UIFNBYJNVNMFWFMNBSL
0.18 L (0.19 US qt, 0.16 Imp.qt)
1