– 16 –
12. AIS-plug Set (5VY-A4890-70)
This plug set is used when the AIS (Air Induction System), an exhaust gas purifying system, is
removed.
Installation
1. Remove the hose attached to the cylinder head cover and the air cut-off valve
accompanying the hose.
2. Remove the cap fitted to the hose, remove the reed valve and plate from inside.
3. Install the plate (5SL-1482L-70) in replacement of the cap. Apply liquid gasket to the plate.
4. Remove the cylinder head cover and the four collars fitted to the cover. Install the PIN
(93608-16M16).
5. After removing the hose connected to the air filter casing form the air cut-off assembly,
insert the PLUG (90336-10020) onto the side of the air filter casing to close the opening.
Parts List
No. PART No. PART NAMEQ’TY REMARKS
1 5SL-1482L-70 PLATE, 22
* 2 93608-16M16 PIN, DOWEL 4
3 90336-10020 PLUG, TAPER1
To Next Page
Loading...
