– 3 –
2. Spark Plug Set (14B-R465B-70)
The spark creating portion of this spark plug is of a semi-surface discharge type of shape.
Since these spark plugs have a copper gasket, caution is needed during installation on
the following points.
1. The tightening torque is 12 – 15 N•m (1.2 – 1.5 kgf•m).
2. When not checking the torque, tighten by rotating through 30° after manual
tightening in the case of new plugs. When reusing plugs, tighten by rotating through
15°.
Parts List
No. PART No. PART NAMEQ’TY REMARKS
114B-1119C-70 PLUG, SPARK 4 NGK R0465B-10
To Next Page
Loading...
