ENGINE REMOVAL
5-7
EAS23720
INSTALLING THE ENGINE
1. Install:
• Engine mounting adjust bolts
(temporary tighten)
2. Install:
•Engine
3. Install:
• Engine mounting bolt (rear lower side) “1”
• Engine mounting bolt (rear upper side) “2”
•Locknuts
NOTE:
Lubricate the lower and upper engine mount-
ing bolts threads with lithium-soap-based
grease.
4. Install:
• Engine mount bolt (front left side) “1”
(temporary tighten)
5. Install:
• Engine mount collar (inner) “1”
• Engine mount collar (center) “2”
• Engine mount collar (outer) “3”
• Right front engine mount bolt “4”
(temporary tighten)
6. Tighten:
• Engine mounting adjust bolts
NOTE:
Use the pivot shaft wrench “1” and pivot shaft
wrench adapter “2” to tighten the engine
mounting adjust bolts.
7. Tighten:
• Upper locknut “1”
• Lower locknut “2”
Engine mounting adjust bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
Pivot shaft wrench
90890-01471
Frame spanner socket
YM-01471
Pivot shaft wrench adapter
90890-01476
To Next Page
Loading...
Need help?
General
