Do you have a question about the Yamaha XJR1300 2007 and is the answer not in the manual?
Displacement | 1251 cc |
---|---|
Bore x Stroke | 79.0 mm x 63.8 mm |
Compression Ratio | 9.7:1 |
Fuel System | Fuel Injection |
Ignition | TCI |
Transmission | 5-speed |
Final Drive | Chain |
Front Suspension | Telescopic fork |
Front Brakes | Dual disc |
Rear Brakes | Single disc |
Front Tire | 120/70 ZR17 |
Rear Tire | 180/55 ZR17 |
Width | 765 mm |
Height | 1, 115 mm |
Seat Height | 795 mm |
Ground Clearance | 135 mm |
Fuel Capacity | 21 liters |
Engine Type | Air-cooled, 4-stroke, DOHC, 4-valve |
Max Power | 72 kW (98 PS) @ 8, 000 rpm |
Max Torque | 108.4 Nm @ 6, 000 rpm |
Rear Suspension | Swingarm |
Instructions that could result in severe injury or death.
Special precautions to avoid vehicle damage.
Provides key information to make procedures easier or clearer.
Locating and understanding vehicle identification and model labels.
Overview of the motorcycle's key systems and components.
Crucial details for disassembly, parts, seals, and fasteners.
Overall dimensions, weight, and turning radius of the motorcycle.
Detailed technical data for the engine components and performance.
Specifications for frame, wheels, tires, brakes, and suspension systems.
Details on ignition, starting, charging, lighting, and signaling systems.
Specifications for torque values of various engine and chassis fasteners.
Recommended lubricants for engine and chassis lubrication points.
Diagrams and instructions for routing electrical and control cables.
Schedule and procedures for routine maintenance checks and replacements.
Checks and adjustments for engine components and systems.
Checks and adjustments for chassis components and systems.
Checks and adjustments for electrical system components.
Details on the ignition system's circuit diagram and troubleshooting.
Details on the electric starter circuit, operation, and troubleshooting.
Information on the charging system, including circuit diagrams and troubleshooting.
Overview and troubleshooting for headlights, taillights, and indicators.
Details on turn signals, hazard lights, horn, and related troubleshooting.
Components, operation, and troubleshooting for the EFI system.
Overview, operation, and troubleshooting of the anti-theft immobilizer system.
Identification and checking procedures for various electrical components.
Steps for removing, disassembling, checking, and installing the front wheel.
Procedures for removing, disassembling, checking, and installing the rear wheel.
Detailed procedures for inspecting, replacing, and servicing front brake components.
Detailed procedures for inspecting, replacing, and servicing rear brake components.
Steps to remove, check, and install the motorcycle handlebars.
Procedures for removing, disassembling, checking, and assembling front fork legs.
Steps for removing, checking, and installing the steering head assembly.
Procedures for handling, removing, checking, and installing rear shock absorbers.
Steps for removing, checking, and installing the swingarm assembly.
Procedures for removing, checking, and servicing the drive chain and sprockets.
Procedure for removing the engine from the motorcycle.
Removal, checking, and installation of camshafts and related components.
Procedure for removing, checking, and installing the cylinder head.
Steps for removing, checking, and installing valves and valve springs.
Procedures for removing, checking, and installing cylinders and pistons.
Detailed procedures for removing, checking, and installing clutch components.
Disassembly, checking, and assembly procedures for the oil pump.
Steps for separating, disassembling, checking, and assembling the crankcase.
Procedures for removing, disassembling, checking, and installing transmission components.
Procedures for removing, installing, and checking the fuel tank.
Steps for removing, checking, and adjusting throttle bodies and sensors.
Inspection and installation of the air induction system components.
Guide to basic troubleshooting for potential vehicle issues.
Troubleshooting common causes for engine starting failures.
Diagnosing and resolving issues with incorrect engine idling speed.
Troubleshooting common causes of poor brake performance.
Troubleshooting common problems with lights, signals, and the horn.