To Next PageTo Next PageWhat to do if Yamato SM501 Laboratory Equipment shows 'Back-up battery error'?
If you encounter a 'Back-up battery error' with your Yamato Laboratory Equipment, try turning on the main power switch to the battery.
What to do if Yamato SM501 shows 'Heater error'?
If your Yamato Laboratory Equipment is showing a 'Heater error', the suggested solution is to replace the heater.
What to do if Yamato SM501 Laboratory Equipment displays 'Sensor error'?
If your Yamato Laboratory Equipment displays a 'Sensor error', it is recommended to replace the sensor.
What to do if Yamato Laboratory Equipment shows 'Main relay error'?
If your Yamato Laboratory Equipment displays a 'Main relay error', the suggested solution is to replace the relay.
What to do if Yamato Laboratory Equipment shows 'Triac error'?
If your Yamato Laboratory Equipment is showing a 'Triac error', the suggested solution is to replace the triac.
General| Model | SM501 |
|---|---|
| Magnification | 40x - 1000x |
| Light Source | LED |
| Stage | Mechanical |
| Condenser | Abbe condenser, NA 1.25 |
| Eyepiece | WF10x |
| Objective Lenses | 4x, 10x, 40x |
Explains the meaning and importance of symbols used for safe operation.
Provides a detailed explanation of various warning, caution, restriction, and action symbols.
Lists critical warnings and cautions for safe operation, covering hazards like combustible gases, electrical shock, and cable damage.
Guides on selecting an appropriate installation site and performing initial setup steps.
Details the steps and stages involved in the STERILIZE and STERILIZE & DRY operation modes.
Lists error codes, their definitions, and solutions for unit malfunctions.
