To Next PageTo Next PageWhat to do if Yamato SM511 Laboratory Equipment shows 'Back-up battery error'?
If you encounter a 'Back-up battery error' with your Yamato Laboratory Equipment, try turning on the main power switch to the battery.
What to do if Yamato SM511 shows 'Heater error'?
If your Yamato Laboratory Equipment is showing a 'Heater error', the suggested solution is to replace the heater.
What to do if Yamato SM511 displays 'Sensor error'?
If your Yamato Laboratory Equipment displays a 'Sensor error', it is recommended to replace the sensor.
What to do if Yamato Laboratory Equipment shows 'Main relay error'?
If your Yamato Laboratory Equipment displays a 'Main relay error', the suggested solution is to replace the relay.
What to do if Yamato Laboratory Equipment shows 'Triac error'?
If your Yamato Laboratory Equipment is showing a 'Triac error', the suggested solution is to replace the triac.
General| Brand | Yamato |
|---|---|
| Model | SM511 |
| Category | Laboratory Equipment |
| Language | English |
Lists critical safety warnings and cautions regarding operation, power cable, and general use.
Details specific warnings related to pressure, hot surfaces, vents, and water levels.
Covers site selection, placement, grounding, power connection, and final checks for installation.
Details precautions for lid opening, hot surfaces, lid seal integrity, and control panel guard usage.
Provides a flowchart illustrating the sequence of operations and modes.
Details how to set sterilization and drying temperatures and times for the unit.
Outlines the step-by-step procedure for the STERILIZE operation, including setup and stages.
Explains the setup and stages of the STERILIZE & DRY process, from start to drying.
Explains self-diagnostic error codes, their indicators, fail-safe mechanisms, and solutions.
Lists common symptoms, their potential causes, and suggested check points for diagnosis.
