Yamato SM511 - Handling Precautions; Handling Precautions: Hazards & Abnormalities

29
5. HANDLING PRECAUTIONS
Warning
1.
Hazardous
substances
.
Never process explosive or flammable items. Fire or explosion causing serious injury or
death may result. See “List of Hazardous Substances” (P.40) for more information on these
items.
2.
DO NOT operate
equipment
when abnormalities are detected
.
If unit begins emitting smoke or abnormal odors for reasons unknown, turn off main power
(MCB) immediately, disconnect power cable from power supply, and contact a local dealer
or Yamato sales office for assistance. Continuing to operate without addressing
abnormalities may cause fire or electric shock, resulting in serious injury or death. Never
attempt to disassemble or repair unit. Repairs should be always be performed by a certified
technician.
Caution
1. D
O NOT
climb on top of e
quipment
.
Do not attempt to climb onto unit or substitute it for a proper step ladder. Units are not
designed to support bodily weight and damage may result. In addition, unit may become
unstable and tip over or fall resulting in equipment damage, serious injury or death.
2.
DO NOT
place
i
tems
on
top of
equipment
.
Do not place any objects on unit. Doing so may cause unit to become unstable and tip over,
resulting in possible equipment damage, injury or death.
3.
DO NOT operate
equipment
during thunderstorms
.
In the event of a thunderstorm, turn off main power switch (MCB), and disconnect power
cable immediately. A direct lightning strike may cause equipment damage, fire or electric
shock, resulting in serious injury or death.