To Next PageTo Next PageWhat to do if Yamato Laboratory Equipment does not start?
If your Yamato Laboratory Equipment doesn't start, check if the power plug is correctly connected to the receptacle. Also, verify that there is no power failure in the supply.
Why does the temperature fluctuate during Yamato DP23C operation?
Temperature fluctuations during operation of Yamato Laboratory Equipment can occur due to several reasons: * Too many samples being processed. Reduce the number of samples. * Direct wind from an air conditioner. Adjust the device's position to avoid direct airflow. * Significant changes in ambient temperature. Stabilize the ambient temperature. * Samples being too moist. Use drier samples. * The power supply voltage being lower than the proper value. Check and correct the power supply voltage.
General| Model | DP23C |
|---|---|
| Manufacturer | Yamato |
| Category | Laboratory Equipment |
| Display | LCD |
| Accuracy | ±0.5% FS |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 40°C |
