Yamato SM511 - Service & Repair; Service & Repair: Requests and Parts

37
10. SPECIFICATIONS
SM311/511
Model SM311 SM511
System Automatic High pressure steam sterilizer
Temperature
Setting Range
Sterilization 105°C~128°C
Drying 150°C~180°C
Maximum Operational Pressure 0.2MPa (29.0psi)
Power Requirement AC220V 9.5A (50/60Hz)
Control Unit HiTec IV CR Type Microprocessor Control
Sensor 1 (Chamber Temp.) Pt100Ω thermometer sensor
Sensor 2 (Water Temp.) Thermocouple (Type T)
Timer 1min. ~ 99hours and 59min. 100 ~ 999hours
Heater 1 (Sterilization) 2.0kW
Heater 2 (Drying) 1.5kW
Safety Devices
Main circuit breaker, Over pressure safety valve,
Self-diagnostic circuitry; temp sensor abnormality monitor,
Low water sensor, SSR, and heater
Exterior Dimensions (W×D×H):
17.3”×20.9”×38.0”
44cm×53cm×96.5cm
17.3”×20.9”×42.7”
44cm×53cm×108.5cm
Interior Dimensions (Diameter, Depth):
11.8”, 17.5”
30cm, 44.5cm
11.8”, 26.2”
30cm, 66.5cm
Capacity (cu. ft): 1.2 1.8
Capacity (liters): 36 51
Weight
176.4 pounds
80kg
187.4 pounds
85kg
Drain Bottle 1
Basket 2
Bottom Plate 1
Condensation Trap 1
Instruction Manual 1