I
5. Trouble and Troubleshooting
Trouble Probable Cause Measure
Starting Failures
Starter turns, but
engine
No
fuel
.
Repleni
sh
fuel
; vent air
does not start
Fuel
filter
is
clogged.
Replace
elemen
I
Improper fuel
Replace
with recommended
fuel.
Faulty
fuel
injection. Ask for repairs.
Compression
leakage
from Ask for
repairs.
intake/exhaust
valve.
Starter does not tum or Faulty clutch
pos1tion.
Shift to
NEUTRAL
and
start.
tums slowly
Insufficient battery
charge.
Check
rlu1d
lever;
recharge;
replace.
(Eng1ne
can
be
turned
Cable
terminal
contact
failure.
Remove
rust
from
terminal;
retighten.
manually)
Faulty safety
sw1tch
device. Ask for repairs.
Faulty starter switch. Ask for repairs.
Power
lacking
due
to
other
use.
Ask for
repairs.
Consult your
dealer.
Eng1ne
cannot be turned
Internal
parts
seized;
broken.
Ask
for
repairs.
manually
Abnormal
Exhaust
Colour
Load
1ncreased
Inspect propeller
Black
smoke
Contaminated
1ntake
silencer
Clean
element.
Improper
fuel.
Replace
with
recommended
fue
l.
Faulty spraying ot
fuel
Injection
valve.
Ask for
repairs.
Incorrect intake/exhaust
va
l
ve
head
Ask
for
repairs.
clearance.
Wh1te
smoke
Improper
fuel.
Ask for repairs.
Faulty spraying of fuellnjeclion
valve.
Ask tor repairs.
Fuel
injection timing off.
Ask for
repairs.
Lube oil bums;
excessiVe
consumption. Ask for
repa1rs.
Consulting
Your
Ya
nmar
Dealer
or
Distributor
Refer difficult problems and repairs
to
your Yanmar dealer
or
distributor.
At the time
of
trouble, check and report
the
following:
1.
Engine model and number:
2. Boat name, material
of
hull, size (tons):
3. Use, type
of
fishing done, no.
of
hours run:
4. Total no. of operation hours (refer to hour metre), age
of
boat:
5. Condition before trouble (engine rpm, type
of
operation, load condition, etc.):
6. Details
of
trouble:
Reference
3.3.2(3)
4.3.4(1)
3.3.2(1)
4.3.2{4)
4.3.4(6)
3.1.1
3.1.1
(exhaust colour; sound
of
engine; does engine start; can engine be turned manually;
type
of
fuel used; brand and viscosity
of
lube oil; etc.)
7.
Past
prob
lems and repairs:
46