PRODUCT OVERVIEW
6LT Series Operation Manual
19
Dimmer Linkage
The same brightness as the setting of Display is applied to Switch panel and Control head.
Figure 12
Auto Dimmer
Auto dimmer is enabled, the brightness of each
device is automatically adjusted according to the
ambient brightness.
1. Select “Auto dimmer”.
(Display: Auto dimmer)
• “YES”: Auto dimmer mode
• “NO”: Manual dimmer mode
Figure 13
2. Select “Auto dimmer limit”.
(Display: Auto dimmer limit)
Figure 14
3. Set the minimum and maximum brightness as
required.
• The brightness is adjusted in 8 steps.
Figure 15
OIL PRESSURE COOLANT TEMP
00
0
MAIN MENU
Alarms/DIAGs
Display
Engine speed
Monitor settings
Synchro
Utility
Choices
Split window
Window select
Brightness
Night mode
Auto dimmer
Auto dimmer limit
YES
NO
OIL PRESSURE COOLANT TEMP
00
0
MAIN MENU
Alarms/DIAGs
Display
Engine speed
Monitor settings
Synchro
Utility
Choices
Split window
Window select
Brightness
Night mode
Auto dimmer
Auto dimmer limit
High limit
Low limit
OIL PRESSURE COOLANT TEMP
00
0
MAIN MENU
0
1
2
3
4
5
6
7