EasyManua.ls Logo

Yanmar 8LV320 - Every 1000 Hours of Operation

Yanmar 8LV320
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PERIODIC MAINTENANCE
52
8LV Series Operation Manual
Perform the following maintenance every 1000 hours
or 4 years of operation, whichever comes first.
Replacing the Seawater Pump Impeller
Cleaning and Checking the Seawater
Passages
Adjusting the Propeller Shaft Alignment
Replacing the Lagging of Turbo-charger
Replacing the Seawater Pump Impeller
The seawater impeller must be replaced every
1000 hours even if it is not damaged.
See Checking and Replacing the Seawater Pump
Impeller on page 47.
Cleaning and Checking the Seawater
Passages
After prolonged use, clean the seawater passages
to remove trash, scale, rust and other contaminants
that collect in the cooling water passages. This can
cause declining cooling performance. The following
items need to be inspected:
Heat Exchanger
Pressure Cap
Contact your authorized Yanmar Marine dealer or
distributor.
Adjusting the Propeller Shaft Alignment
Contact your authorized Yanmar Marine dealer or
distributor.
Replacing the Lagging of Turbo-charger
Contact your authorized Yanmar Marine dealer or
distributor.
Every 1000 Hours of Operation
Component Part No.
Lagging of turbo-charger 119798-18340
8LV_OPM.book 52 ージ   

Table of Contents

Related product manuals