Need help?Do you have a question about the Yanmar SD25 and is the answer not in the manual?
General| Brand | Yanmar |
|---|---|
| Model | SD25 |
| Category | Marine Equipment |
| Language | English |
This manual describes the Sail-Drive Model SD25 and related engine models.
Explains safety alert symbols and general precautions for safe operation.
Defines hazard levels like DANGER, WARNING, CAUTION, NOTICE.
Safety advice to follow before operating the Sail-Drive, including crush hazard.
Safety measures during operation, covering explosion, fire, sever, and alcohol hazards.
Safety measures during maintenance, covering exposure, entanglement, burn, sudden movement, exhaust, and electrical hazards.
General safety notices regarding lighting, tools, slipping, and environmental responsibility.
General overview, owner/operator, and dealer responsibilities.
Procedures for initial engine start-up and break-in period.
Identifies key parts of the Sail-Drive with labels and a diagram.
Explains galvanic corrosion and methods for its control and prevention.
Covers protection from shore power and maintenance of underwater drive coating.
Guidelines for selecting and fitting propellers, including torque specifications.
Information on selecting and filling the Sail-Drive with lubricating oil.
Procedures for checking the instrument panel and alarm system indicators.
Details the warning for seawater entering the vessel via the rubber seal.
Lists essential visual checks to perform before starting the Sail-Drive.
Details the procedure for checking the remote control handle and its operation.
Explains how to manage the cooling water system before and after operation.
Provides torque specifications for tightening fasteners and different bolt types.
Explains the importance of maintenance, daily checks, log keeping, and using correct parts.
Summarizes maintenance items and intervals for the Sail-Drive.
Outlines procedures for cleaning, coating repair, anode inspection, and propeller inspection.
Covers 50-hour and 100-hour maintenance tasks like oil changes and anode inspection.
Lists tasks for 250 hours and annual maintenance, including cleaning and inspections.
Details replacement of flexible mount (2000h) and rubber diaphragm seal (5yr).
Provides technical details like gear system, ratios, speeds, capacities, and engine compatibility.
To Next Page