BEFORE YOU OPERATE
22 SD25 Operation Manual
DAILY CHECKS
Before starting the Sail-Drive, make sure it
is in good operating condition. Make sure
you check the following items:
Visual Checks
1. Check for damaged or missing parts.
2. Check for loose, missing or damaged
fasteners.
3. Check oil level. See Filling with
Lubricating Oil on page 19.
4. Open cooling water cock before
operation. Drain cooling water and
close cooling water cock after
operation. See Engine Cooling Water
on page 26.
If any problem is noted during the visual
check, the necessary corrective action
should be taken before you operate the
engine.
SD25_OPM.book 22 ページ ２０１４年６月２７日 金曜日 午後５時２９分
To Next Page
Loading...