PRODUCT OVERVIEW
SD25 Operation Manual 13
12/05
UNDERWATER DRIVE
COATING
The lower gear case coating may be
damaged when hit by objects in the water,
or when having deposits removed from it.
The underwater coating must be inspected
at least once per year and when it is
believed that an object was hit that may
have caused damage. Repair and repaint
damaged areas immediately.
Observe the following precautions when
applying antifouling or marine paint to the
bottom of the boat hull:
• Always follow the paint/coating
manufacturer’s directions for surface
preparation and application.
• Always use a high quality primer and
topcoat paint specifically designed for
aluminum outboards, Sail-Drives or
Stern-Drives.
• Never paint the sacrificial anodes
installed on the Sail-Drive.
• Never paint the Sail-Drive with a material
that contains copper or tin.
• Never paint over drain holes, sacrificial
anodes, or other items specified by the
sacrificial anode Manufacturer.
Contact your authorized Yanmar Marine
dealer or distributor for assistance.
Galvanic corrosion damage, normal
maintenance and consumable parts are
not covered by the Yanmar Limited
Warranty.
SD25_OPM.book 13 ページ ２０１４年６月２７日 金曜日 午後５時２９分
To Next Page
Loading...