Yanmar YM135d - Fork Shaft Assembly

2-2 P.T.O. Fork Shaft Assembly clutch housing side. Put the (3) P.T.O. shaft fork
in the center position.
(1) Attach the (4) O-ring PI1 to the (1) P.T.O.
fork shaft.
(2) Insert the fork of the (3) P.T.O. shaft fork
NOTES:
a)
Consmction Differences in rhe (I) P. T. 0. Fork
into the slot on the (2) P.T.O. sliding gear.
Shafts: Those wirh a Senid No. after 51001 have 3
After Serial No. 51 001 - 16T
round slots
Before Serial No.
51000 - 19T
(3) Attach the items in step (1) and (2) from the
Those wirh a Serial No. before 51000 have 5 round
slots
Transmission care
,
(4) O-RING PI 1
SHIFTER, P.T.O. change
/-
STEEL BALL 5 16
SPRING WASH
Final reduction
Clvrch housing ride
(1 I
Neutral