Yanmar YM135d - Reversellst Speed Shift Shaft Assembly

2-10 Reversellst Speed Shift Shaft Assembly No. of teeth:
After
SerialNo. 51001: all four models - 25
(1)
Attach the (4) "0" ring PI1 to the (1) Re-
Before Serial No. 51 000: all four models - 26
versellst speed shift shaft. (3) Insert the part in step 1 from the clutch
housing side.
(2) Place the (3) Reversellst speed shift fork
into the slot of the
(2) Reversellst sliding gear.
(4) Place the (3) Reversellst speed shift fork
into the neutral position. (center slot).
0.49 (125mmJ
CIuIch housing ride-