Insert the hydrometer into one of the battery
holes and
suckx~p enough electrolyte into the
glass tube so that the float moves freely. Be
sure to hold the glass tube vertically; the read-
ing at (A)
is
the specific gravity
2.
GENERATOR
&
CURRENT LIMITER
(1)
Specifications
Generator:
GP8108 (KOKUSAN)
Current limiter:
RS
2130 (KOKUSAN)
(2)
'Structure
11
Rotating
direction
21
Operational rotation
3)
Allowable
rotation
4)
Charging
perofrmance
51
Rotation
for
initial
charging
Name: 8-8 pole magneto revolving type genera-
tor
Components:
Clockwise
(viewed
fmm
flywheel
ridel
1000
mm
-
5000
rpm
12,000
rpm
Moie
than
8.5A114
at
4000
rpm
than
1500
rpm
a) Stator (armature windings)
i) Each coil is connected in series. Wire
conductors are wound around an 8 pole
armature core.
A
ii)
An aluminum die cast plate has recti-
fying diodes attached to
it.
b) Flywheel
The throttled plate flywheel has a ferrite mag-
net attached to
it,
and the pulley, shaft and
bearings are pressed in.
(3)
Connecting Diagram
Connecting Diagram (GP8108, RS21301
To Next Page
Loading...
