Yanmar YM135d - Brake

baii bearing 6207 (right hand) and the cir-
clip 72 so that the backlash (Item 11)
is.
Transmission case
[Detail A1
0.005 - 0.007 in. (0.13 - 0.18 mm).
Shims
0.004. 0.012 in.
d)
At this time take care to see that there 10.1, 0.3 rnm)
is no space between the differential housing
and the ball bearing 6207 (both sides), the
differential bearing case and the ball bearing
6207 (left hand).
-
e)
Measure the clearance C between the
final reduction gear case and differential
bearing case, and insert the shims:
C - C +
0.004 in. (0.1 mm) between the final reduc-
tion gear case and differential bearing case.
Angular ball bearing
.
-
/ ~i'fferential assembly
Differential housing
3. BRAKE
The brake serves not only to bring the tractor to
a halt when in motion, but the left and right
-
brakes of the tractor operate independently of
-
each other and allow the operator to negotiate
tight turns. The brake shaft of the tractor
1s
fitted behind the differential lock shaft and 1s
A-
hermetically sealed to prevent water from enter-
ing when the tractor
is used in irrigated fields.
The brakes are the internal expansion, mechanical
type. Foot pressure forces the brake linings
,
against the brake drum to brake the tractor. The