Yanmar YM135d - Page 91

5. Backlash for all spur gears
7
6. Deflection for all shafts, except
differential lock shah
Thickness of shift fork tip
Clearance
1 .-
8. Outer d~ameter of fork shafts
llnner diameter of shift forks
10. Free length of low-hi shift fork
spring
9.
Fitted load of low-hi shift fork
spring
Fitted length of low-hi
shift
fork spring
-
Free length of shift fork springs
Fitted load of shift fork springs
Fitted length of shift fork spring!
(countershaft) and spiral ring
pinion and ring gear
13. Backlash of differential
pinion and differential sidegears
pinion
Clearance
pinion liner
Standard specification
15.50-21.32
lbs 17.03-9.67 kg) 1
9.04 lbs (4.1 kg)
Replacement
limit
-
I
a: adjusting shims: 0.004 and
0.012 (0.1 and 0.3)
0.004-0.008 (0.1 -0.21 0.020
10.5)
0.006-0.012 10.15-0.3) 1 0.02 (0.5)
11.66-14.44
lbs (5.29-6.55 kg)
Testing equipment
8.33 lbs (3.78 kg)
Dial gauge
0.4528-0.4724 (11.5-12)
Calipers
Calipers
Micrometer
Cylinder gauge
Calipers
Calipers
Dial gauge
Dial gauge
Dial gauge
Cylinder gauge
Micrometer
Calipers