32 support@yardistrystructures.com
Fig. 14.2
Fig. 14.1
A: Lift last Roof Panel Assembly (without Rafter Beam Brackets) over Beam Assembly taking care not to drag
the panel on the beams. Panel ts under the Peak Cap, push up on Peak Loop to lift Peak Cap. The centre of
the other panels may have to be pushed up to t fourth panel. (g. 14.1 and 14.2)
B: Check again that Peak Cap is lined up with (729) Corner LT and (737) Corner RT. (g. 14.3)
Roof Panel
Assembly
Peak
Cap
Roof Panel
Assembly
Step 14: Attach Final Roof Panel
Part 1
x 3
Peak
Cap
Roof Panel
Assembly
Fig. 14.3
Corner
LT & RT
Corner
LT & RT
To Next Page
Loading...
