63 support@yardistrystructures.com
Step 27: Metal Hooks and Plaque
A: Two 50 mm Hooks are included with this unit for attaching wiring. They can be placed anywhere along the
Rafters as needed. Pre-drill with a 1/8” drill bit before installing. (F27.1 and F27.2)
B: Attach Gazebo ID Plaque to a prominent location on your gazebo with two #10 x 1-1/4” Pan Screws. This
provides warnings concerning safety and important contact information. A tracking number is provided to allow
you to get critical information or order replacement parts for this specic model. (F27.1 and F27.3)
Hardware
2 x #10 x 1-1/4” Pan Screw
F27.1
F27.2
50 mm Hook
F27.3
Note: We have provided two
50 mm hooks for optional use
to hold in place any wires if
required. These hooks are
not designed to hold any
heavy products such as
lights, ower pots, etc.
#10 x 1-1/4”
Pan Screw
Gazebo ID
Plaque
Components:
2 x 50 mm Hooks
1 x Gazebo ID Plaque
To Next Page
Loading...
