YASKAWA GA800 GA80U Series User Manual

DOCUMENT NUMBER: TOEPC71061779
CATALOG CODE:
GA80Uxxxxxxxx
CAPACITIES:
Three-Phase 240 V Class: 1 to 150 HP
Three-Phase 480 V Class: 1 to 600 HP
Three-Phase 600 V Class: 125 to 500 HP
6-Phase/12-Pulse 400 V Class: 75 to 600 HP
IP55/UL TYPE 12 HEATSINK EXTERNAL
MOUNTING
INSTALLATION MANUAL
GA800 DRIVE
PDF
yaskawa.com/TOEPC71061779

YASKAWA GA800 GA80U Series Specifications

General

Series	GA800 GA80U Series
Output Voltage	Matches Input Voltage
Power Range	0.4kW to 1.5MW
Power Rating	0.4 kW to 450 kW
Control Method	V/f control
Overload Capacity	150% for 60 seconds
Cooling Method	Air Cooled
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication	Ethernet, Modbus, DeviceNet, Profibus, CC-Link
Safety	STO (Safe Torque Off)
Operating Temperature	+50°C
Humidity	5% to 95% (non-condensing)
Enclosure Rating	IP20, IP00

Summary

Preface and General Precautions

Overview

Describes the purpose of the IP55/UL Type 12 Heatsink External Mounting drive.

Applicable Documentation

Lists related Yaskawa manuals for drive settings, operation, and troubleshooting.

Safety Precautions

Details essential safety instructions, signal words, and general warnings for safe operation.

Warning Label Content and Location

Shows the location and meaning of warning labels on the drive.

Receiving

How to Read the Catalog Code

Explains how to interpret the drive's catalog code based on its features and specifications.

Mechanical Installation

Installation Environment

Outlines required environmental conditions for proper drive installation and operation.

Drive and Cut-Out Dimensions

Provides exterior, mounting, and panel cut-out dimensions for IP55/UL Type 12 drives.

Drive Dimensions

Lists detailed physical dimensions for various IP55/UL Type 12 Heatsink External Mounting drive models.

Panel Cut-Out Dimensions

Specifies panel opening sizes required for IP55/UL Type 12 Heatsink External Mounting drive installation.

Estimated Drive Weights

Lists the estimated weights for different drive models for installation planning.

Gasket Installation

Details the procedure for installing gaskets to ensure enclosure sealing.

Installation Procedures

Describes various methods (A-E) for installing the drive into an enclosure panel.

Gasket Models

Lists the specific gasket part numbers required for different drive models.

Maintenance

Fan Replacement Procedures

Provides step-by-step guides for replacing cooling and circulation fans by drive model.

Gasket Replacement

Instructions on how to remove and install replacement gaskets to maintain enclosure integrity.

Specifications

Common Drive Specifications

Details general drive characteristics, control methods, and input/output signals.

Drive Derating

Presents rated current values at different carrier frequencies and duty ratings for derating.

Ambient Temperature Derating

Explains how ambient temperature and installation method affect drive derating.

Altitude Derating

Describes output current derating requirements based on installation altitude.