To Next PageTo Next Page
Need help?Do you have a question about the YASKAWA GA700 GA700 Series and is the answer not in the manual?
General| Control Method | V/f Control |
|---|---|
| Overload Capacity | 150% for 60 seconds |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Ground Fault, Short Circuit |
| Communication | EtherNet/IP, PROFIBUS, DeviceNet |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C |
| Humidity | 95% RH (non-condensing) |
| Altitude | 1, 000m or less |
| Series | GA700 |
Defines hazard signal words like DANGER, WARNING, CAUTION, NOTICE for safety understanding.
Outlines essential safety precautions, responsibilities, and warnings for safe product use.
Explains the meaning of the drive's LED status ring indicators for operation, alarms, and faults.
Provides a step-by-step guide for the initial installation, wiring, and setup of the drive.
Presents a standard wiring diagram for connecting the main circuit and motor to the drive.
Guides on connecting the main power supply and the motor to the drive for initial operation.
Explains the use of the setup wizard for guided initial drive configuration and parameter setting.
Describes the process of automatically tuning motor parameters for optimal performance and control.
Explains how faults and alarms are indicated on the keypad and LED status ring.
Details the steps required to reset faults and alarms after resolving the underlying cause.
