(in hex)
FUNCTION SETTING VALUE
122h n034 Electronic Thermal Overload 0 No Protection
Protection 1 Standard Motor (8 min.)
(for OL1 fault) 2 Standard Motor (5 min.) 1
3 Blower-cooled Motor (8 min.)
4 Blower-cooled Motor (5 min.)
123h n035 Overheat Stop Method
0
Ramp to Stop - Decel 1 (fault)
(for OH1 fault
1
Coast to Stop (fault) 3
2
Ramp to Stop - Decel 2 (fault)
3
Continue Operation at 80% (alarm)
To Next Page
Loading...
