(2) F Series Dimensions in mm (inches)
Drawing 1 USAFED-O2Cf-jjl, -03C!:-jl (Taper Shaft)
k LR
LL t LRI (0SSI:LE --14-'-15 (059_)l 81(°315'
OPTICAL ENCOOER i MOTOR LG i P'° (o,s,5,
,
KB2
Notes : Detail of Shaft Extension
1. Plug and clamp are not attached for receptacle connection.
2. Key and keyway comply with JIS B 1301-1976
(Parallel key. keyway: common class.)
3 Motor should be mounted with connectors down.
4. L; in the models are as follows according to types of the encoder (P/R).
Standard : S (8192 P/R)
Semi-standard : W (1024 P/R)
Drawing 2 USAFED-05Ci-jjl, -09Ci-jjl (Taper Shaft), -13C_jjj2 (Straight Shaft)
L LR
LL _ {B(07_) I1_ 12(0472) 6 (0236)_"]
LT LM j --_, 14(0_'TI I 153(0406)
" '} • I 6 lo_ _ (oz_l
OPTICAL ENCODER MOTO E. LC . /I_"0)P1.25
_. ,,_ .-SECTX X
Notes : For -05CSl, -09CSl For -13CS2
1. Plug and clamp are not attached for receptacle connection. Detail of Shaft Extension
2. Key and keyway comply with JIS B 1301-1976.
(Parallel key, keyway: common class.)
3 Motor should De mounted with connectors down.
4. f.-.Iin the models are as follows according to types of the encoder (P/R).
Standard : S (8192 P/R)
Semi-standard : W (1024 P/R)
J
Drawing 3 USAFED-2OC!:-j2 to --44C!:_j2 (Straight Shaft)
t
2-M8 SCREWS (FOR EYEBOLT)
OPTICALENCOOER , MOTOR LG -- LC LR
g' \
4-LZ
I KB1
KB2 Detail of Shaft Extension
Notes :
1. Plug and clamp are not attached for receptacle connection.
2. Motor should be mounted with connectors down.
3. L"..in the models are as follows according to types of the encoder (P/R).
Standard : S (8192 P/R)
Semi-standard : W (1024 P/R)
- 252 -
To Next Page
Loading...
