3 Wiring
E-18
Outputs Connected to Other Input and Output Devices
Connect the CPU RUN output (interlock output) from the CPU Module to
other input and output devices as an interlock signal, and confirm that the
CPU RUN output from the CPU Module is ON before using inputs and out-
puts on other devices. The other inputs and outputs are not valid until the
CPU RUN output turns ON.
<Power-ON Sequence>
Power source to
MP3300
OFF
OFF
CPU RUN output
Interlock single input to other
input and output devices
Inputs and outputs on
other devices
Inputs and outputs are valid.
ON
ON
To Next Page
Loading...
