YASKAWA CIMR-JC4A0002BAA User Manual

MANUAL NO. TOEP C710606 26B
YASKAWA AC Drive-J1000
Compact V/f Control Drive
Quick Start Guide
Type: CIMR-JU
Models: 200 V Class, Three-Phase Input: 0.1 to 5.5 kW
200 V Class, Single-Phase Input: 0.1 to 2.2 kW
400 V Class, Three-Phase Input: 0.2 to 5.5 kW
To properly use the product, read this manual thoroughly and retain
for easy reference, inspection, and maintenance. Ensure the end user
receives this manual.
Contém manual suplementar em Português.
Receiving
1
Mechanical Installation
2
Electrical Installation
3
Start-Up Programming &
Operation
4
Troubleshooting
5
Periodic Inspection &
Maintenance
6
Specifications
A
Parameter List
B
Standards Compliance
C
Peripheral Devices &
Options
7
http://nicontrols.com

YASKAWA CIMR-JC4A0002BAA Specifications

General

Brand	YASKAWA
Model	CIMR-JC4A0002BAA
Category	Controller
Language	English

Summary

Preface and General Safety

General Safety

Provides crucial safety messages and conventions for operating the drive.

Mechanical Installation

Mechanical Installation Procedures

Outlines specifications, procedures, and environment for proper mechanical installation.

Electrical Installation

Main Circuit Connection Diagram

Details wiring connections for the main power circuit of the drive.

Main Circuit Wiring

Describes functions, specifications, and procedures for safely wiring the main circuit.

Control Circuit Wiring

Details procedures and preparations for wiring control terminals.

Braking Resistor

Start-Up Programming & Operation

Using the Digital LED Operator

Drive and Programming Modes

Basic Operation

Explains basic settings for initial drive operation and parameter configuration.

No-Load Operation Test Run

Test Run with Load Connected

Verifying and Backing Up Parameter Settings

Covers parameter access levels, password settings, and copy functions.

Troubleshooting

Motor Performance Fine Tuning

Information for counteracting oscillation, hunting, or other faults during a trial run.

Drive Alarms, Faults, and Errors

Descriptions of drive faults, alarms, errors, and their responses.

Fault Detection

Details fault displays, their causes, and possible solutions.

Alarm Detection

Lists alarm codes, their causes, and possible solutions.

Operator Programming Errors

Explains oPE codes, their causes, and possible solutions.

Diagnosing and Resetting Faults

Provides instructions for removing fault conditions and restarting the drive.

Troubleshooting without Fault Display

Periodic Inspection & Maintenance

Inspection Procedures

Periodic Maintenance

Peripheral Devices & Options

Installing Peripheral Devices

Appendix B: Parameter List

Parameter Table

A comprehensive table detailing all drive parameters, descriptions, and settings.

Appendix C: Standards Compliance

Section Safety

Safety guidelines and criteria for maintaining compliance with standards.