Electrical
Installation
This chapter explains proper procedures for wiring the control
circuit terminals, motor and power supply.
3.1 SECTION SAFETY
.............................................36
3.2 STANDARD CONNECTION DIAGRAM...............39
3.3 MAIN CIRCUIT CONNECTION DIAGRAM..........42
3.4 TERMINAL BLOCK CONFIGURATION..............43
3.5 PROTECTIVE COVERS.....................................44
3.6 MAIN CIRCUIT WIRING.....................................46
3.7 CONTROL CIRCUIT WIRING.............................52
3.8 I/O CONNECTIONS...........................................59
3.9 MAIN FREQUENCY REFERENCE......................62
3.10 BRAKING RESISTOR........................................64
3.11 INTERLOCKING WITH CONNECTED
MACHINERY.....................................................66
3.12 WIRING CHECKLIST.........................................67
3
YASKAWA ELECTRIC TOEP C710606 26B YASKAWA AC Drive – J1000 Quick Start Guide
35
To Next Page
Loading...
