Need help?Do you have a question about the YASKAWA CIMR-G5M and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Cooling Method | Fan cooled |
| Output Frequency | 0-400 Hz |
| Overload Capacity | 150% for 60 seconds |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Ground fault, Short circuit |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 65°C |
| Humidity | 95% RH or less (non-condensing) |
| Altitude | 1000 m (3300 ft) above sea level (derating may apply) |
| Enclosure Rating | IP20 |
| Input Voltage | 3-Phase 200-240 VAC, 3-Phase 380-480 VAC |
Provides a general description of the GPD 515/G5 drive, its capabilities, and manual applicability.
Details verification, damage checks, and proper storage procedures for the drive upon receipt.
Covers essential mounting, clearance, and environmental considerations for drive installation.
Introduces electrical installation requirements, including wiring practices and component selection.
Specifies wire sizing, terminal connections, and guidelines for main circuit input and output wiring.
Details essential grounding procedures for the drive and associated equipment for safety and performance.
Discusses the use of external devices like circuit breakers for starting, stopping, and emergency stops.
Explains methods for line filter application, cable shielding, and drive installation for EMC standards.
Details the interconnections for the drive's control circuit, including signal and control leads.
Provides diagrams and notes for establishing 2-wire control operation for the drive.
Details the wiring diagrams and notes for implementing 3-wire control operation for the drive.
Covers encoder feedback requirements, option boards, and connection details for advanced drive control.
To Next Page