Start-Up
Programming &
Operation
This chapter explains the functions of the LED operator and how
to program the drive for initial operation.
4.1 SECTION SAFETY
.............................................70
4.2 USING THE DIGITAL LED OPERATOR..............73
4.3 THE DRIVE AND PROGRAMMING MODES.......79
4.4 START-UP FLOWCHART..................................87
4.5 BASIC OPERATION..........................................88
4.6 POWERING UP THE DRIVE.............................112
4.7 NO-LOAD OPERATION TEST RUN..................114
4.8 TEST RUN WITH LOAD CONNECTED.............116
4.9 VERIFYING AND BACKING UP PARAMETER
SETTINGS.......................................................117
4.10 TEST RUN CHECKLIST...................................119
4
YASKAWA ELECTRIC TOEP C710606 26B YASKAWA AC Drive – J1000 Quick Start Guide
69
To Next Page
Loading...
