u
Drive Label Warnings
Always heed the warning information listed in Figure i.1 in the position shown in Figure i.
2.
Risk of electric shock.
WARNING
Read manual before installing.
Wait 1 minute for capacitor discharge after
disconnecting power suppl
y
.
To conform to requirements, make sure
to ground the supply neutral for 400V class.
Figure i.1 Warning Information
Warning
Label
Figure i.2 Warning Information Position
i.2 General Safety
YASKAWA ELECTRIC TOEP C710606 26B YASKAWA AC Drive – J1000 Quick Start Guide
15
To Next Page
Loading...
