YASKAWA JAPMC-CP3301-1-E User Manual

4 Inspections
E-20
4 Inspections
Perform inspections and part replacements according to the information
that is provided in this section.
4.1 Daily Inspections
The daily inspection items are given in the following table.
* MP3000-series MP3200/MP3300 Troubleshooting Manual
(Manual No.: SIEP C880725 01)
Inspection Item Description Criteria Correction
Installation
condition
Loose screws
or covers
All screws and covers
must be secure.
Tighten the
screws.
Connection
conditions
Loose termi-
nal screws
Screws must not be
loose.
Tighten the termi-
nal screws.
Connectors
Connectors must not
be loose.
Tighten the lock
screws on the
connectors.
Separation
between
crimped ter-
minals
Suitable gaps must
be maintained.
Correct the gaps.
Indi-
cators
RDY
indicator
Check the
status.
Must be lit.
(Otherwise, there is
an error.)
Refer to the rele-
vant manual.*
RUN
indicator
Check the
status in RUN
mode.
Must be lit.
(Otherwise, there is
an error.)
ALM
indicator
Check the
status.
Must not be lit.
(Otherwise, there is
an error.)
ERR
indicator
Check the
status.
Must not be lit.
(Otherwise, there is
an error.)
BAT
indicator
Check the
status.
Must not be lit.
(Otherwise, the bat-
tery is low.)
Replace the Bat-
tery.
M_ALM
indicator
Check the
status.
Must not be lit.
(Otherwise, there is
an axis alarm.)
Refer to the rele-
vant manual.*

YASKAWA JAPMC-CP3301-1-E Specifications

General

Brand	YASKAWA
Model	JAPMC-CP3301-1-E
Category	Controller
Language	English